( Call or Text ) Appointment, Prices, Consultation. Ask for Joe!

Service Done By Appointment only. Please Call First.

​310-733-4334

joe battery service

(TEXT) 310-733-4334   24HRS A DAY  ask for Joe!

Hours Operation:
Monday-Sunday
8:00 to 5:00

We offer Solar battery installation, Solar battery delivery, Solar battery replacement, Solar battery removal, we have  a wide selection of Solar batteries in stock. Find replacement Solar batteries to power up your Solar battery  today.  Solar battery Service, exide battery, delco Battery, cross country battery, optima battery, why pay more for you  Solar battery in a parts store, come to the specialist.

Free consultation  on your battery needs. Award winning service                                         Satisfaction guarantee

solar battery specialist 

3638 overland ave la ca 90034

Free Battery delivery and installation.

Specifications

  • Nominal Voltage: 6 volts
  • Capacity at C/100: 198 AH
  • Plate Alloy: Lead Calcium
  • Posts: Forged terminals & bushings
  • Container/Cover: Polypropylene
  • Operating Temperature Range: -76°F to 140°F (-60°C to 60°C)
  • Charge Voltage at 68°F (20°C)
  • Cycle: 2.30 to 2.35 VPC
  • Float: 2.25 to 2.30 VPC
  • Vent: Self Sealing (2 PSI Operation)
  • Electrolyte: Sulfuric acid thixotropic gel
  • Resistance: 4.0 Milliohms (full charge)
  • Terminal: T881

Rated non-spillable by ICAO, IATA, and DOT
Approved by CEC

Made in the USA by East Penn Manufacturing

Weight: 68 lbs. (31 kg)
Dimensions LxWxH: 10.26" x 7.09" x 11.06" (260 x 181 x 276 mm)

8ggc2 dekA gel

T -105 TROJAN

Type T 105                                          Weight lbs                                         62 (28)                                              Dimensions inches                           L 10 3/8  W 7 1/8  H 10 7/8               Capacity minutes                             (@ 25 amps 447)                               (@ 5 hr ah rate 185)                        (20 hr rate amp  225)

Specifications6 Volts435 Amp-hours at the 20 hour rateDimensions: 11.625"L x 7.125"W x 16.75"HWeight: 121 pounds

Trojan L16H 435Ah, 6V Deep Cycle Battery

Specifications

  • Nominal Voltage: 12 volts
  • Capacity at C/100: 108 AH
  • Plate Alloy: Lead Calcium
  • Posts: Forged terminals & bushings
  • Container/Cover: Polypropylene
  • Operating Temperature Range: -76°F to 140°F (-60°C to 60°C)
  • Charge Voltage at 68°F (20°C)
  • Cycle: 2.30 to 2.35 VPC
  • Float: 2.25 to 2.30 VPC
  • Vent: Self Sealing
  • Electrolyte: Sulfuric acid thixotropic gel
  • Terminal: STUD

Rated non-spillable by ICAO, IATA, and DOT
Made in the USA by East Penn Manufacturin Weight: 70 lbs. (31.8 kg)
Dimensions LxWxH: 12.93" x 6.75" x 9.34"  (329 x 171 x 237 mm)

Deep cycle batteries

Deep Cycle Batteries used in renewable energy (RE) systems are different from car batteries and that difference is critical. RE systems by nature are cyclical: energy is captured and stored, then later consumed, in a (usually) regular. For example, in a battery-based solar electric system, the energy produced daily by the solar panels is stored in the battery bank, which is then used by loads at night or on not-so-sunny days. This repetitive process subjects the batteries to a slow, daily charge and discharge pattern.

Car batteries are not meant to be used in this way. They can release a great deal of their stored energy at once, to start the engine, then they immediately receive a rapid recharge from the car’s alternator. They’re not meant to recover their charge slowly, as would happen in a solar electric system. They’re very impatient that way! In fact, a car battery in a RE system would quickly die and need to be replaced. Deep cycle batteries, on the other hand, can be gradually discharged by as much as half of their capacity and will patiently await gradual recharge. When properly maintained, a deep cycle battery can last four to 10 years.

There are two divisions and three main types of deep cycle batteries used in RE systems. The divisions are flooded andsealedbatteries. Flooded batteries use a fluid electrolyte, have ports to access their cells’ fluid reservoirs, and require maintenance (adding fluid). Sealed batteries use non-fluid electrolyte contained in inaccessible cells. There’s only one flooded type: flooded lead-acid batteries. Sealed batteries include Absorbed Glass Mat (AGM) batteries and gel cell batteries.      

.

Read more about the solar "deep cycle" batteries used in renewable energy applications and the differences between flooded lead-acid and sealed batteries.

Deep Cycle Batteries Introduction

All About Deep Cycle Batteries Deep Cycle Batteries (also known as 'solar batteries ') provide electrical storage in renewable energy (RE) systems. If you want to use your electricity anytime other than when the system is producing it, you will need batteries. So if, during a nice sunny day, your solar array produces a lot of electricity, you’ll need batteries to access that power after the sun goes down. And although it may seem counter-intuitive, it’s also true that if you have a wind turbine or solar panel array that is connected directly to the electric grid without batteries, you will not be able to use the power they produce during a grid power outage. If you need to be able to use power at any time, you need batteries. But which ones? The first thing to do is to identify the type of battery you will use in your system.